Welcome, Friday, May 18, 2012
Register
Login
SMT EQUIPMENT
HOME
ABOUT US
OUR FACILITY
CONTACT US
SELL YOUR EQUIPMENT
Phoenix X-ray PCBA 160 XXL
IBE ID #:120222-001
Air-Vac DRS 24C
IBE ID #:120325-001
CTI XLCW-AOI
IBE ID #:111128-014
DEK Galaxy
IBE ID #:111207-004
Keyword Search
All
Machines
Feeders
Spare Parts
Search
Featured Equipment
Prev
Next
AOI
View All Inspection - X-Ray
Air-Vac DRS 24NC
IBE SMT Inventory ID : 101018-002
Air-Vac Serial Number : 6041
Vintage : 2000
Details
Model: DRS24NCXX
(11) Nozzles Included
220 VAC 15 Amps
Specifications ( See Details above for installed options )
Electrical (also see Operating Notes):
• Machine Power: 220 VAC, 50/60 Hz, 5.3K VA
• PC Power: 220VAC, 50/60Hz, 2 amp
• Monitor Power: 220VAC, 50/60Hz, 1 amp
• Camera Power: Powered from FireWire PC card
Air/Nitrogen (also see Operating Notes):
• Bottom Heaters: 90-130 psi, 25 scfm (DRS24NC.2D & DRS24NCXX.HED), clean, dry air (non-condensing) source.
1/4”-18NPT with 3/8” hose diameter (supplied). Direct plumb.
• Upper Heater: 90-130 psi, 3 scfm clean, dry air or nitrogen (non-condensing) source.
Physical:
• Machine Operating Dimensions - DRS24NCXX.HED: 60” x 46” x 29”
(70” x 46” x 29” with workstation*)
• Machine Weight: 250 lbs.
• Workstation Table Dimensions (W x D x H): 62” x 40” x 27”
• Monitor Dimension (W x D x H): 16” x 17” x 17”
• Monitor Weight: 53 lbs.
• Operator Viewing Height (from module base): 21-24” (adjustable height chair recommended)
Component Requirements:
Beamsplitter Vision System: No minimum size, 2.0” square, 1.0” height
*Direct View (perimeter): No minimum size, 4.0” square, 2.0” height
Top & Bottom Side Clearance: (DRS24NC) Top=1.100”, Bottom=.920”
(DRS24NCXX) Top=2.800”, Bottom=.920”
Component Positioning Adjustments:
Maximum Vertical travel (top to bottom): (DRS24NC) 5.0”, (DRS24CXX.HED) 7.0”
Theta Adjustment: +/- 10 degrees (20 degrees total)
X & Y Table: Manual control. Cable driven, backlash free design. Fine adjustment with resolution of less than 0.0005”
Internal Vacuum System:
Nozzle Vacuum: 26”Hg at pump, 20”Hg (minimum) at cup
Parts Handling Probe: 25”Hg minimum
Solder Removal Tool: 25”Hg minimum
Accuracy and Repeatability:
Placement Accuracy: +/- 0.001” at 3 Sigma (or a true position of 1.4 mil). This is defined as the ability for the machine to hit the target.
Repeatability: +/- 0.0003”. This is defined as the ability for the machine to return to the same spot.
Force Measurement System:
Component Placement Force: Up to 2000 grams in increments of 1 gram. Target point and +/- range adjustment throughout process.
Heating Systems:
Top Heater: Patented 1000 watt, triple-pass (preheats incoming air) heating element with imbedded thermocouple for process (temperature) control.
Bottom Heaters: 4000 watt convection preheater. DRS24NC (20”W x 12”D), DRS24NCXX 20”W x 16”D).
Heater Controllers: All heaters controlled via a closed-loop, auto tuning PID controller. Self calibrating to +/- 5 degrees C.
Microscope Optics:
Stereo Microscope: Leica M3 binocular with adjustable 10X eyepieces, MZ6 1:6 zoom magnifier seamless adjustment), custom focusing ring.
Share On:
SALES STATUS:
Available
Warranty Available
Spare Parts Available
Login To Request A Quote
Print Brochure
Email To Co-Worker
Click Any Image to View Slideshow