Screen Printers

View All Screen Printers

DEK ELA

IBE SMT Inventory ID : 111015-020

DEK Serial Number : 276636

Vintage : 2001

Details

Green Camera
Blue USC with VF35 Vacuum
2Di - Basic Board and Stencil
Model: ELA Plus
Equipped as a Horizon 220 VAC 8A Single Phase Fixed Chase SQ with Feedback

Specifications ( See Details above for installed options )

*Board Handling

Minimum Size: 40mm x 50mm
Maximum Size: 510mm x 508mm (20 in. x 20 in.)
Maximum Weight: 1 kg
Size Tolerance: +/- 0.3mm (0.012 in.)
Thickness: 0.4mm – 6.0mm (0.02 in. – 0.25 in.)
Underside Component: 3mm – 42mm programmable Clearance
Transport: Maximum 3.5mm (0.15 in.) of clearance along Board edge for belt feed
Transport Speed: 400mm/sec (19.0 in./sec) nominally
Feed Direction: Selectable: Left to right, right to left, left to left, right to right
Rail Justification : Front Rail Fixed
Interface : SMEMA and all major placement machines
Interface Height: 820mm –980mm (32 in. – 38.5 in.) Configurable
Width Adjustment: Programmable 45mm –508.55 (1.75 in. –20 in.) In 0.1 mm increments
Tooling: Fully adjustable over board range
Registration/Alignment: Vision recognition alignment
Tooling Pin Height: 81.0mm, +0.0mm, -0.02mm

*Vision Parameter

Recognition Method: Synthetic shape or video model recognition
Fiducials: 2 fiducials + non vision mode
Fiducial Size: 0.5mm –3mm (0.02 in. – 0.14 in.)
Camera System: Single telecentric XY camera
Fiducial Location: Anywhere on board self teach/co-ordinate entry (Simultaneous look up/down optics)
Fiducial Teach: Shape and dimension parameter entry
Align Calibration: Fully automatic
Operator Control: Integrated with Printer Control
Vision System Hardware: Cognex 8100 Vision

*Print Parameters

Screen Frames: DEK 265
Print Image: Front or center image, programmable
Print Area: 510 mm x 489 mm (20 in. x 19.25 in.) max (With DEK screen frame
Print Stroke: 56 mm – 566 mm (2.2 in. –22.3 in.)
Print Speed: 2 mm/sec –150 mm/sec (0.08 in./sec –5.9 in.sec)
Print Pressure: 0 kg – 20 kg (0 lbs – 44 lbs)
Print Gap: 0 mm – 6 mm (0 in. –0.24 in.)
PCB Stencil Separation: 0.1 mm/sec – 20 mm/sec (0.04 in./sec-0.79 in./sec0
Speed: from 0 mm to 3 mm (0.12in.) from stencil
Print Modes: Print/print double squeegee; flood/print; print flood
Squeegee Types: Single trailing with flood bar; double trailing or Diamond, various sizes (see DOES sheet for options and sizes)
Screen Changeover: Manual
Screen Adjustment X/Y range: +/- 10 mm (+-0.4 in.), accuracy +/- 1-
Micron. Theta range: +/- 1.75°, accuracy +/-0.001°
Paste Dispense: Standard 1 kg cartridge: programmable volume, Frequency and position (0.5 kg optional)
Screen Cleaning: Fully programmable wet, dry and combination Options, plus Vacuum option, with Auto cleaning After idle time, all fully programmable

SALES STATUS: Sold

Warranty Available

Spare Parts Available

Print Brochure

Email To Co-Worker

Click Any Image to View Slideshow

IBE SMT Equipment, LLC
318 Corporate Woods Drive, Magnolia, TX 77354
Toll Free: (800) 353-6942 Phone: (281) 259-9660 Fax: (281) 259-8863

Reconditioned & Used DEK ELA 03 Screen Printers, DEK ELA, Dek screen printers, stencil printers - IBE ID: 111015-020
All Equipment is subject to prior sale - All prices and terms are subject to change without notice. © Copyright 2007. IBE SMT Equipment, LLC All Rights Reserved.