Welcome, Wednesday, June 19, 2013
SELL YOUR EQUIPMENT
Heller 1809 Mark III
IBE ID #:130412-001
Heller 1088 EXL
IBE ID #:121014-001
BTU Pyramax 150
IBE ID #:120201-005
Vitronics Soltec XPM-1030N
IBE ID #:130429-004
View All Reflow Ovens
Click Any Image to View Slideshow
IBE SMT Inventory ID : 120601-003
Heller Serial Number : 0107J2-A7A2-81791-03
Vintage : JAN 2007
Hours : 10,207
208-240 VAC 3-Phase 100A
Edge Rail and Mesh Belt
Lead Free Ready
Specifications ( See Details above for installed options )
Heller 1707-EXL Specifications:
*Power Input (3 Phase)
- Standard 208/240 VAC
- 100 amps @ 208/240 VAC
*Optional Power Inputs Available
- 380/400/415/480 VAC
Overall Length - 134"
Overall Width - 54"
Overall Height - 63"
Typical Net Weight - 3000 lbs.
Operating System - Windows XP®
Waterless Cooling w/ Flux Separation System - Optional
Typical Nitrogen Consumption - 700 to 900 SCFH*
Center Board Support - Optional
Height from Floor – Standard 35.5" ± 2.0"
Clearance Above Conveyor Pins - 1.15"
Clearance Below Conveyor Pins - 1.15"
Length of PCB Support Pins - .187"
Minimum/Maximum Board Width - 2" - 20"
Power Width Adjustment - Standard
Computer Controlled Width Adjust - Optional
Auto Lubrication System - Standard
Top Heating Zones - Seven (7)
Bottom Heating Zones - Seven (7)
Number of Cooling Zones - One Standard
Heater Type - Instant Response Open Coil
Heater Material - Nichrome
Temperature Range - 25-350° C - Standard
High Temperature Up to 450° C - Optional
The 1707 EXL supports high mix / medium volume throughput… at speeds up to 24 inches
(60 centimeters) per minute, while conserving valuable factory floor space. Rapid response
times and precise temperature controls assure process uniformity, regardless of component
density or board loading, with identical profile performance in either air or nitrogen.
The Model 1707 EXL combines sophisticated design elements with the engineering expertise and
reflow technology leadership you've come to expect from Heller Industries:
Highest Yields and Tight Process Control
• The most efficient heat transfer from extra high volume, high-velocity, heating
modules, producing heater module response of less than one second to
temperature changes of less than 0.1°C, thereby maintaining profile integrity for
heavy board loads.
• Wide process window for "universal profiling" — allows many different boards to
be run on a single temperature profile
• Included with every system:
• Advanced 3 thermocouple PCB profiling and process parameter logging
capability with the capacity to store up to 500 temperature recipes and 500
• Cpk software — “real-time” Cpk calculation shows oven performance and
repeatability and gives Cpk data for each zone and the entire oven — a Heller
Lowest Cost of Ownership
• Computer-controlled automatic lubrication system for "hands-off" maintenance
• Optional flux separation system removes up to 95% of flux from the oven
tunnel — virtually eliminating maintenance and protecting the environment
• Pure forced convection design saves nitrogen — with consumption levels as
low as 700 SCFH at 500 PPM*
• Low KW design saves electricity and reduces warm up and profile changeover time
Share via E-mail
Spare Parts Available
Get Machine Quick Quote
IBE SMT Equipment, LLC
318 Corporate Woods Drive, Magnolia, TX 77354
Toll Free: (800) 353-6942 Phone: (281) 259-9660 Fax: (281) 259-8863
Heller 1707-EXL Reflow Oven, heller reflow oven, seven zone reflow oven, lead free reflow oven, Heller 1700, heller 7 zone, heller lead free, mesh belt, edge rail - IBE ID: 120601-003
All Equipment is subject to prior sale - All prices and terms are subject to change without notice. © Copyright 2007. IBE SMT Equipment, LLC All Rights Reserved.
Inspection and X-Ray
SMT Spare Parts